Cub Cadet Specialties
Thrower Blower Blade Parts

Orders will not be processed, nor shipped between Oct 19 - Nov 6 2017. for annual inventory and warehouse updates
(Today is: )

 

FREE shipping on orders of $299.00 or more

Home 3 Point Sleeve Hitch Belts Briggs & Stratton Brinly
Clutch Driveline Parts Creepers M&W 9 Speed Driveline Rear-end Parts Electrical Electric Lifts
Electric PTO's Exhaust Parts Mufflers Fenders Foot Rests Front PTO's
Fuel & Tune-up Gaskets Hi-Lo Creepers Hoods Grills Dashes Hydraulic/Electric Manual Lifts
Hydro Parts NOS Kohler Gaskets NOS Kohler Overhaul Kits Kohler Parts Internal NOS Kohler Pistons
Kohler Ring Sets NOS Kohler Rods Kubota Parts Lights Lo-Boy Parts
Mechanical PTO's Misc. & Novelty Mower Deck Blades Mower Deck Parts Mower Deck Spindles
MTD Control Cables Mufflers New Old Stock Parts NOS & Single Decals NOS - NLA Belts
Paint and Decals Pulleys  Seats Snow Thrower Tiller Plows Blades Spring Assist
Steering Tractors Vehicle Trailer Dash  Wheels View Cart




Click the Parts Lookup Button BELOW to make sure you have the right PART NUMBER.

 

Click the Thumbnail to View Large Image

SHIPPING $10.00 PER ORDER to the lower 48 States.
International and Canadian orders Email for shipping cost before ordering.
All parts are unpainted unless stated otherwise.

Lower drive belt guard for No. 1 or 2 and 2B tiller gearboxes PN/ IH-79-954-C1 or IH-79954-C1

 Used when mounting No. 1 or No. 2 Tillers on 82 series or newer tractors

$46.00

 

NOS Cub Cadet MTD CCC 303 to 340 Snow blower Conversion Kit PN/ 759-3925

Includes everything show in the picture.

Last available in 2004 for $614.49

$540.00

 

Wheel Bushing for front wheels on Cub Cadet Original and No. 1 Trailer PN/ IH-376188-R1 $18.00Ea.

Front Wheel Bushing PN/ IH-492027-R1 USE IH-539476-R1

Fits 76 80 81 111 182 282 382 383

$13.50Ea.

New Old Stock Parker Sweeper brush strip PN/ IH-542841-R1 8 In Stock

Fits International 1 and 1A Lawn Sweeper 14 1/2" long

$20.00 Ea.

New Old Stock Left hand mule drive Idler arm PN/ IH 106678 C1 or IH-106678-C2

$26.00

  NOS OEM Mule Drive Front hanger assembly complete 703-0096 SOLD OUT

482, 580, 582, 680, 682, 782, 982, 1282, 1711, 1712, 1806, 1810, 1811, 1812 as well as many others

Deck Models 328 336 357 358 359 374 385

$0.00

  NOS OEM Mule Drive Front hanger assembly frame 703-0096

482, 580, 582, 680, 682, 782, 982, 1282, 1711, 1712, 1806, 1810, 1811, 1812 as well as many others

Deck Models 328 336 357 358 359 374 385

$64.00

New cub cadet manual Lift Bracket PN/ 703-2128 USE 703-2128-4021

Fits lift handles for blades and snow throwers/ blowers

$40.00

New Old Stock Wide frame Rock shaft lift plate assembly PN/ IH-548048-R1 IH 548048 R1SOLD OUT

Fits 108, 109, 1000, 1200, 1250, 128, 129, 1450, 149, 1650, 169, 800, 86

$0.00

Grade 50 Steel Lift Handle Extension Bracket Assembly   PN/ 784-5415 USE 784-5415-0499

Laser cut and milled, no cutting torches grinders used.

Fits 450 snow blowers and others with a little imagination!

Fits any tractor that originally called for a 450 or 451 blower option

$48.00

Implement lift arm  PN/ 719-3097 USE 603-0027 Super Duty Grade 50 Steel Blower/Implement lift arm  PN/ 719-3097 USE 603-0027

Laser cut and milled, no cutting torches grinders used. Guaranteed not to break!

Grade 8 stainless steel bolts included

Fits 451 and 551 snow blowers and other with a little imagination!

Fits 1440, 1641, 1861, 1862, 1863, 1864,1782, 2082, 2084,  2086, 2182, 2284 and others

$95.00

NOS Cub Cadet Blower/Implement lift arm  PN/ 719-3097 USE 603-0027

Fits 451 and 551 snow blowers and other with a little imagination!

Fits 1440, 1641, 1861, 1862, 1863, 1864,1782, 2082, 2084,  2086, 2182, 2284 and others

$95.00

Hydraulic lift - blade bracket PN/ 719-3093

$90.00

Lift bracket lock out PN/ IH 144583 C1 IH-144583-C1 USE 703-0671

Fits 42 and  54 inch Push/plow Blade

$4.00

Shoulder spacer PN/ 784-0241

Fits 450 451 1002 1030 1208 1238 and 800 lawn tractors

$4.00

Brand NEW Peerless 2 Link 23 x 8.50-12 Garden Tractor/ SnowBlower Tire Chains

Suggested Retail of $118.00

$96.00 Set

Brand NEW Peerless 2 Link 23 x 10.50-12 Garden Tractor/ SnowBlower Tire Chains

Suggested Retail of $131.94

$80.00 Set

Brand NEW Peerless 2 Link 26 x 12-12 Garden Tractor/ SnowBlower Tire Chains

Suggested Retail of $118.00

$86.00 Set

Brand NEW Peerless 4 Link 23 x 10.50-12 Garden Tractor/ SnowBlower Tire Chains

Suggested Retail of $108.00

$68.00 Set

Brand NEW Security Chain Co. ( Division of Peerless Industrial Group) Tighteners set of 2 $15.00

Brand NEW EZ Clip on chain  Tighteners set of 2 $17.00

New Extension Spring for 42 and 54 inch blades

PN/ IH-PO27 USE 959-3380 or 732-3037

Used when adding QA throwers to late model tractors so the chute doesn't hit the hood.

$26.00 Ea.

NOS Front Blade Extension Spring PN/ 703-1633, 703-1633-0499 USE 903-1633-0499

Fits 352 54 In. Blade, 375 42 In. Snow blade, 376 54 In. Snow blade, 424 42 In. Snow Blade

$51.00 Ea.

Curved Top link lift arms Replaces  PN/ IH-548192 R1 and IH-79011 C1 New Curved Top link lift arms for QA36 and QA42 throwers Set of 2

Replaces  PN/ IH-548192-R1 and IH 79011 C1

Used when adding QA throwers to late model tractors so the chute doesn't hit the hood.

$28.00 Set

Front blade main frame assembly PN/ IH-473918-R92 USE 703-0575

Fits 42 and 52 front plow blades, and blades 1963 and up

And 375 376 Blades

IH 473918 R92

$160.00

 

Front blade spring trip lock PN/ 703-0648 Or IH-466891-R11

Fits 42 and 52 IH front plow blades,

And 375 376 424 Blades

703-0648 Or IH 466891 R11

$22.00

 

NOS 42 AND 54 inch Snow plow and front blade lift arm PN/ IH-473925-R1 USE 759-3105

NLA from Cub Cadet

$45.00

Wide Frame Implement lift rod PN/ IH 548589 R1 Wide Frame Implement lift rod PN/ IH 548589 R1

NLA from Cub Cadet

 For wide frame implements, approx 28" long.

$30.00

Narrow Frame Implement lift rod PN/ IH-473924-R1

NLA from Cub Cadet

For narrow frame implements, approx 32" long.

$30.00

42 " AR400 Grader Blade steel Front Blade serrated Cutting Edge PN/ IH-464371-R2 USE 703-0658

A dual edged push blade. One side has serrated teeth and the other has the smooth edge like the OEM blade. It is made out of AR400. AR stands for "Abrasion Resistant" and 400 is the class. Increased the thickness to .179" (3/16") of an inch unlike the OEM .134" blades. The straight edge is the same height from the middle of the holes to the edge as the OEM. The serrated edge, the teeth are added to the OEM edge making them stick down for a little more chewing power.

Unpainted

$60.00

42 " AR400 Grader Blade steel Front Blade Cutting Edge PN/ IH-464371-R2 USE 703-0658

This blade is 2 1/2 inches tall

A dual edged push blade. Smooth edge like the OEM blade. It is made out of AR400. AR stands for "Abrasion Resistant" and 400 is the class. Increased the thickness to .179" (3/16") of an inch unlike the OEM .134" blades. Unpainted

$54.00

42" Front Blade Cutting Edge PN/ IH-464371-R2 USE 703-0658

Unpainted

$48.00

54" Front Blade Cutting Edge PN/ IH-61634-C1 USE 703-0659-0637

Unpainted

$50.00

Heavy Duty 42" Front Blade Cutting Edge 1/4 inch thick PN/ IH 464371 R2 USE 703-0658

Unpainted

$60.00

 

Wear edge Bolts & Nuts for IH blade cutting edge Set of 7 PN/ IH-16-897-R1

 $6.00

 HEAVY DUTY Skid Shoes Snow Dozer Blades 42 or 54 Inch IH-466906-R11 USE 703-0650 HEAVY DUTY Skid Shoes for Snow Dozer Blades 42 or 54 Inch

Replaces PN/ IH 466906 R11 USE 703-0650

$35.00 Set

International Cub Cadet snow thrower side decal Set of 2

BB36, CW36, QA36, QA36A, QA42A, QA36B, QA42B

$12.00 Set

  Snow thrower skids BB36, CW36, QA36, QA36A, QA42A, QA36B, QA42B. PN/ IH-475565-R1 USE IH-475565-R2

$24.00 Per Set

  Modified Snow thrower skids  Replaces PN/ IH 475565 R1 USE IH-475565-R2

 

Fits BB36, CW36, QA36, QA36A, QA42A, QA36B, QA42B.

$44.00 Per Set

  Cub Cadet Snow blower drift cutters PN/ 05139A-0716 USE 790-00181-0637

Fits 350, 450, 451 Two Stage as well as about all Cub Cadet Walk behinds

$42.00 Set

  Cub Cadet Snow blower skid shoes PN/ 784-5038A USE 784-5038B-0637

Fits 350, 450, 451 Two Stage as well as, Models 420, 524, 826, 1028

$36.00 Per Set

  Cub Cadet Snow blower poly skid shoes PN/ 490-241-0010

Fits most two stage snow blowers

$32.75 Per Set

  Cub Cadet Snow blower poly rolling skid shoes PN/ 490-241-0038

Fits most two stage snow blowers

$30.00 Per Set

  Modified Snow blower skids Replaces PN/ 784-5038A USE 784-5038B-0637

Fits 350, 450, 451 Two Stage as well as, Models 420, 524, 826, 1028

$42.00 Per Set

  Snow blower skid Replaces PN/ 784-5697 USE 784-5697-4033

Fits 1333 1333E 1333SE 1333SWE 1345SWE SW10528L 551 45" Snowthrower 624 Snow Blower Attachment

Or any with a 3" 4.5" 9" bolt pattern

$26.00 Ea.

  Extension Spring PN/ 732-0191

$5.00

 

Wear edge Bolts & Nuts for thrower wear edge Set of 7 PN/ 18-673-R1

 $6.00

 

Wear edge BB36 AND CW36 snow thrower PN/ IH-475566-R1

Better thicker steel than OEM

 $60.00

 

Wear edge QA36, QA36A, QA36B snow thrower PN/ 397-023-R1 USE IH 397023 R2

Better thicker steel than OEM

 $60.00

 

Wear edge QA42 & QA42A snow throwers PN/ IH 397024 R1 USE IH-397024-R2

Better thicker steel than OEM

 $64.00

 

Wear edge Bolts & Nuts for thrower wear edge Set of 7 PN/ 18-673-R1

 $6.00

 

Wear edge Shave Plate for Model 450 Snow Blowers.

PN/ IH-90430-C1 USE 05598-0637

Better thicker steel than OEM

 $56.00

   Snow Thrower Chute sprocket support  PN/ IH 397044 R1 IH-397044-R1

$30.00

   New Old Stock Snow Thrower Chute locking clip  PN/ IH-475571-R1

Fits BB36 CC36 CC42 CW36 Snow Throwers

$10.00

  HEAVY DUTY Snow Thrower Chute Handle Universal Joint Assembly

Less than OEM dealer cost for a better setup

Replaces PN/ IH 397043 R1 984-5149

 Dealer Cost-$32.14

$28.00

Flex joint Block Assembly PN/ 784-5149 USE 684-04350

Fits 190-364-100, 450, 451 45" Snow Blower / Thrower

 032 42 inch Snow Thrower, 190-032-101, OEM-190-032
19A126 42 inch Two Stage Snow Thrower (2008 & Before), 19A-126-100 (2008 & Before)
303 40" Snow Thrower, 190-303-100
340 40" Snow Thrower, 190-340-100
341 42" Snow Thrower, 190-341-100
350 40" Snow Thrower, 190-350-100
353 45" Snow Thrower, 190-353-100
450 45" Snow Thrower, 190-450-100
451 45" Snowthrower
551 45" Snowthrower, 190-551-100
621 Two Stage Snow Blower 40"
624 Snow Blower Attachment
673 42" Snow Thrower, 190-673-100
818 48" Snow Thrower, 590-818-100
823 42" 2-Stage Snowthrower, 190-823-101
SB45 Snowblower, 59A40051727

$13.50

 

Chain Adjuster Auger Rotor Stub shaft shim .010

$1.00 Ea.

Chain Adjuster Auger Rotor Stub shaft shim .025

$1.00 Ea.

NOS Snow Thrower Chain Adjuster grease zerk fitting PN/ IH-109454 Set of 2

Fits QA36, QA42, QA36A, QA42A, QA42B BB36 CW36 throwers

AND

111, 182, 184 Tractor, 282, 3160 Rotary Cutter, 382 Gear & 383 Hydro,
50 Snow Thrower, 76, 80, 81,
C-1 Rotary Mower - Built 1959-1962
C-2 Rotary Mower - Built 1960-1978
C-3 Rotary Mower - Built 1960-1980
Cub 154 Lo-Boy Tractor
Cub 185 Lo-Boy Tractor
Cub-22 Mower - Built 1947 & Since
Farmall Cub Tractor (S/N 185,001 to 210,000)
International Cub Lo-Boy Tractor (S/N 10,001 to 17,200)
International Cub Tractor (S/N 224,705 & Above)
L-22 Mower - Built 1955-1971

NLA from Cub Cadet

$1.00 Pr.

 

  New Old Stock Snow Thrower pivot plate  PN/ IH-527742-R1

Fits QA36 and QA42 Snow throwers

$45.00

Thrower Chain Adjuster Bracket PN/ IH-397032-R1 NEW OLD STOCK OEM Snow Thrower Chain Adjuster Bracket PN/ IH-397032-R1

Fits QA36, QA42, QA36A, QA42A, QA42B throwers

NLA from Cub Cadet

$160.00

 

NOS Snow Thrower Chain Adjuster Bracket   PN/ IH-475541-R2

Fits BB36 and CW36 throwers

NLA from Cub Cadet

$100.00

 

NEW OEM Snow Thrower Adjuster Mounting Pin PN/ IH-397033-R1 or 738-0638

Fits CC36, CC42, QA36, QA42, QA36A, QA42A, QA42B Blowers

$19.00

 

NEW Snow Thrower Auger Rotor Stub shaft PN/ IH-397030-R1

Fits QA36, QA42 Throwers

$28.00

 

CW36 Shear pin PN/ IH-102677 USE IH-397030-R1

Fits CW36 Throwers

$0.50 Ea.

 

NEW Snow Thrower Auger Rotor Sprocket

Fits QA36, QA42 Throwers

$68.00

 

NEW Snow Thrower Auger Rotor Sprocket and shaft kit

Fits QA36, QA42 Throwers

$85.00

 

Auger Rotor Sprocket Assembly PN/ IH-397031-R1 NEW Snow Thrower Auger Rotor Sprocket Assembly PN/ IH-397031-R1

Fits QA36, QA42 Throwers

$90.00

 

New Old Stock OEM Snow Thrower Auger Rotor Sprocket Assembly PN/ IH-397031-R1

Fits QA36, QA42 Throwers

$110.00

 

New Old Stock Snow thrower Front Power Take-Off 90 Degree Gear Box Pulley

PN/ IH- 475613-R91 USE IH-485247-R91 Also IH-485-247-R91

Fits CC36, CC42, CW36, QA36, QA42, QA36A, QA42A

And REAR Tine Tiller Gearbox Model's 1, 1A, 2, 2A PN/ IH-485-247-R91

$85.00

 

NEW Snow Thrower Chain 14T Sprocket PN/ IH-76897-C1 Includes Spirol Pin

Heavier than OEM and comes with an extra set screw for added safety

Fits CC36, CC42, QA36, QA42, QA36A, QA42A, QA42B Blowers

$20.00

 

NEW Snow Thrower Chain complete with Master Link

NLA from Cub Cadet

Fits CC36, CC42, QA36, QA42, QA36A, QA42A, QA42B Blowers

$18.00

 

NEW Snow Thrower Chain Master Link

Fits CC36, CC42, QA36, QA42, QA36A, QA42A, QA42B Blowers

$1.00

 

NEW OEM Snow Thrower Transfer Shaft PN/ IH-397034-R1

Fits CC36, CC42, QA36, QA42, QA36A, QA42A, QA42B Blowers

$73.00

 

  Snow blower gearbox shaft, long 5 15/16" PN/ IH-475606-R1 $52.00

  Snow blower gearbox shaft  short 4 1/8" PN/ IH-475602-R1

$50.00

Gearbox Gasket PN/ IH-493543-R1 Use WM-63283 Snow Thrower / Tiller Gearbox Gasket PN/ IH-493543-R1 Use WM-63283

Fits C36, QA36A, and QA42A Snow Throwers and No. 1 & No. 2 Tiller Gearboxes

$6.00 Ea.

 

New Old Stock Gearbox Cover Gasket PN/ IH-475598-R1

Fits CW36

NLA from MTD/Cub Cadet

$6.00 Ea.

 

Snow Blower Bushing PN/ YS-741-0494 USE 741-0494

Fits 450, 451 and many others. Check your PN

$2.50 Ea.

 

Snow Thrower drive shaft SELF LOCKING Set screws PN/ 102-592 SET OF 2

Fits BB36, CW36, QA36,QA42,  QA36A, and QA42A blowers

$1.50 Per Set

 

Snow Thrower Needle Bearings PN/ IH-387835-R91 USE IH-387835-R92

Fits BB36, CW36, QA36,QA42,  QA36A, and QA42A throwers / blowers

$9.50 Ea.

 

NOS Snow Thrower Driveshaft complete SOLD OUT

PN/ IH-475608-R92     Joint Assy, Universal -Blower half-        
IH-397025-R92     Joint Assy, Universal -Blower half-        
IH-124348-R91     Kit, Universal Joint        
IH-475609-R1     Retainer, Grease        
IH-124355-R1     Cap, Retainer        
102-592     Screw, 3/8-16 X 3/8 Hex-Soc-Hd Cup-Pt Set        
IH-475-607-R92     Joint Assy, Universal -Tractor half

Fits BB36, CW36, QA36, QA42, QA36A, and QA42A blowers

$0.00

 

Snow Thrower Driveshaft U-Joint PN/ IH-124348-R91 Snow Thrower Driveshaft U-Joint PN/ IH-124348-R91

Fits BB36, CW36, QA36, QA42, QA36A, and QA42A blowers

$23.00 Ea.

 

New Old Stock Snow thrower Tiller Gear Box cover PN/ WM 64161 IH-493542-R1

Fits Thrower models BB36, CC36, CW36, QA36, QA42 and all IH Tiller gear boxes

$20.00

Gearbox Gasket PN/ IH-493543-R1 Use WM-63283 Snow Thrower / Tiller Gearbox Gasket PN/ IH-493543-R1 Use WM-63283

Fits C36, QA36A, and QA42A Snow Throwers and No. 1 & No. 2 Tiller Gearboxes

NLA from MTD / Cub Cadet

$6.00 Ea.

 

NOS Snow thrower / Blower 3 Tab Mount Gear Box PN/ IH-475596-R1

Fits Thrower models BB36, CC36, CW36, QA36, QA42

$120.00

Super nice Snow thrower Tiller / Blower 4 Tab Mount Gear Box PN/ IH-543152-R1

Fits Thrower models BB36, CC36, CW36, QA36, QA42 and all IH Tillers

$90.00

Tiller 4 Bolt mount gearbox assembly Narrow and or Wide Frame PN/ IH-543152-R1

Comes with both NOS main drive gears

Fits 1 1A 2 and 2A tillers with 1/2" PTO belt

$240.00

 

Lower pulley for 2B tiller using 5/8 belt. PN/ IH-135554-C1 USE WM-63369

 Used when mounting No. 1 or No. 2 Tillers on 82 series or newer tractors

$70.00

 

Lower pulley for 1, 1A or No. 2, 2A tiller using 1/2 inch belt. PN/ IH-485246-R91

Fits  No. 1 1A or No. 2 2A Tillers with 1/2" belt

$140.00

 

New Old Stock Snow thrower Front Power Take-Off 90 Degree Gear Box Pulley

PN/ IH- 475613-R91 USE IH-485247-R91 Also IH-485-247-R91

Fits CC36, CC42, CW36, QA36, QA42, QA36A, QA42A

And REAR Tine Tiller Gearbox Model's 1, 1A, 2, 2A PN/ IH-485-247-R91

$85.00

 

CW36 Snow Thrower 5/16 In. x 1 1/2In. Coiled Spring Pin  PN/ IH-617939-R1 USE 915-3002 or 715-3002

$3.70

 

Ball bearing PN/ 741-0155 USE 941-0155

Fits to many machines and implements to list

$12.50 Ea.

Snowthrower / Blower Tiller bearing PN/ IH-475628-R92

Fits Thrower models C36, CC42, CW36, QA36, QA42, QA36A, QA42A, and QA36B

Fits Tiller Gearbox Models 1, 1A, 2, 2B

 $19.00 Ea.

Snowthrower / Blower Tiller INNER bearing PN/ IH-475627-R92

Fits Thrower models C36, CC42, BB36, QA36, QA42

Fits 265, 268, 328 Snow Blowers & 50 Snow Thrower

Fits Haban H42 & H48 Snow Throwers/Blowers

$26.00 Ea.

Snowthrower / Blower or Tiller Oil Seal PN/ IH-485306-R1 Use TC-788025

Fits Thrower models C36, CC42, CW36, QA36, QA42, QA36A, QA42A, and QA36B

Fits Tiller Gearbox Models 1, 1A, 2, 2B

$10.50 Ea.

Snow Blower Auger housing gearbox seal PN/ 721-0146 USE 921-0146

$6.20

Snow thrower or Tiller Shaft Snap Ring PN/ IH-269181-R1 USE 916-0101

Fits Thrower models C36, CC42, CW36, QA36, QA42, QA36A, QA42A, and QA36B

Fits Tiller Gearbox Models 1, 1A, 2, 2B

$1.85 Ea.

Lower Snow blower chute Assembly

PN/ 731-1318 731-1318A 731-0903B 731-0903D 731-0903E USE 731-0903E

This and the next 3 parts fit what's listed below

Fits 190-364-100, 450, 451 45" Snow Blower / Thrower

1333SE 1345 SWE 353 1333E
551 45" Snowblower, 190-551-100
624 Snow Blower
2X 930SWE (HM 2013), 31BH95SU710 (HM 2013), 31AH95SU756 (HM 2013), 930SWE (HM 2013)
2X 933SWE (HM 2013), 31BH95SV710 (HM 2013), 31AH95SV756 (HM 2013), 933SWE (HM 2013)
2X 945SWE (HM 2013), 31BH97SW710 (HM 2013), 31AH97SW756 (HM 2013), 945SWE (HM 2013)
930SWE (HM 2008), 31AH9ZSU710 (HM 2008)
930SWE (HM 2009), 31AH95SU710 (HM 2009)
930SWE (HM 2010), 31AH95SU710 (HM 2010)
930SWE (HM 2011), 31AH95SU710 (HM 2011)
930SWE (HM 2012), 31BH95SU710 (HM 2012), 31AH95SU756 (HM 2012)
933SWE (HM 2008), 31AH9JSV710 (HM 2008)
933SWE (HM 2009), 31AH95SV710 (HM 2009)
933SWE (HM 2010), 31AH95SV710 (HM 2010)
933SWE (HM 2011), 31AH95SV710 (HM 2011)
933SWE (HM 2012), 31BH95SV710 (HM 2012), 31AH95SV756 (HM 2012)
945SWE (HM 2008), 31AH9J3W710 (HM 2008)
945SWE (HM 2009), 31AH973W710 (HM 2009)
945SWE (HM 2010), 31AH97SW710 (HM 2010)
945SWE (HM 2011), 31AH97SW710 (HM 2011)
945SWE (HM 2012), 31BH97SW710 (HM 2012), 31AH97SW756 (HM 2012)
SW10528L (HM 2010), 31AH957T596 (HM 2010)

$25.00

 

Upper Snow blower chute Assembly PN/ 731-0849 USE 731-0846C

Fits 190-364-100, 450, 451 45" Snow Blower / Thrower

$25.00

 

Snow blower Shear bolt pin PN/ IH-90443-C1 USE 710-0891

Fits 1028 1333 1333E 1333SE 1333SWE 1345 SWE 1345SWE 190-364-100
353 450 451 551 619 624 805 805314 805315 818

$4.00 Ea.

 

Haban Snow blower / thrower Shear bolt pin PN/ IH-1254817-C1 USE HA-4001

Fits Haban Snow throwers H42, H48, H48, H42, 353, 354

$5.00 Ea.

 

Snow blower chute spring PN/ 732-0264 USE 932-0264

Fits 190-364-100, 450, 451 45" Snow Blower / Thrower

$2.25

 

Chute flange keeper PN/ 706-15718 USE 731-0851A

* There are 118 models that use this part

Fits 190-364-100, 450, 451 45" Snow Blower / Thrower

$2.25 Ea.

 

Chute adjusting star knob  PN/ 720-04125 731-1187 731-1187A 920-0241 753-04051 USE 720-04072A

* There are 100 models that use this part

Fits 190-364-100, 450, 451 45" Snow Blower / Thrower

$3.60 Ea.

 

Chute machine screw bolt  PN/ 710-0166 USE 710-0166A

* There are 100 models that use this part

Fits 190-364-100, 450, 451 45" Snow Blower / Thrower

$3.30 Ea.

 

Chute machine screw bolt nut  PN/ IH-24468-R1 40064 1904644 1538-008 712-0107 USE 912-0107

* There are 100 models that use this part

Fits 190-364-100, 450, 451 45" Snow Blower / Thrower

$2.20 Ea.

 

Chute adjusting star knob washer  PN/ 706-500178 736-3000 736-0483 736-0273 736-0176 USE 936-0176

* There are 100 models that use this part

Fits 190-364-100, 450, 451 45" Snow Blower / Thrower

$2.15 Ea.

 

Chute machine screw bolt washer  PN/ 706-13282 736-0231 USE 936-0231

* There are 100 models that use this part

Fits 190-364-100, 450, 451 45" Snow Blower / Thrower

$2.15 Ea.

 

Chute knob bell washer  PN/ IH-106766-C1 736-0242P 936-0242 USE 736-0242

* There are 100 models that use this part

Fits 190-364-100, 450, 451 45" Snow Blower / Thrower

$2.00 Ea.

 

Chute machine screw bolt shield nut  PN/ 738-0561 USE 938-0561

* There are 100 models that use this part

Fits 190-364-100, 450, 451 45" Snow Blower / Thrower

$3.30 Ea.

 

Chute truss machine screw bolt  PN/ 910-0166 710-0166A USE 710-0166

* There are 100 models that use this part

Fits 190-364-100, 450, 451 45" Snow Blower / Thrower

$3.30 Ea.

 

Chute stainless steel machine screw truss bolt  PN/ 710-0924 USE 710-0255

* There are 100 models that use this part

Fits 190-364-100, 450, 451 45" Snow Blower / Thrower

$2.00 Ea.

 

Chute stainless steel machine carriage bolt  PN/ 910-0276 USE 710-0276

* There are 100 models that use this part

Fits 190-364-100, 450, 451 45" Snow Blower / Thrower

$2.00 Ea.

 

Chute stainless steel machine screw bolt  PN/ 910-0323 USE 710-0323

* There are 100 models that use this part

Fits 190-364-100, 450, 451 45" Snow Blower / Thrower

$2.00 Ea.

 

Chute Stainless Steel Nylon Insert Lock Nut  PN/ 712-0158 USE 912-0158

* There are 100 models that use this part

Fits 190-364-100, 450, 451 45" Snow Blower / Thrower

$0.25 Ea.

 

Idler spring extension PN/ 732-0262 USE 932-0262

Fits 190-364-100, 303, 450, 451, 621 45" Snow Blower / Thrower

Also 213 38 inch Mower, 2130, 2135, 214 42 inch Mower, 2140, 2145, 2146, 2150,
2155, 2164, 2166, 2176, 250 38 inch Side Discharge Cutting Deck, GT2542,
LT2042, LT2138,  LT2180, Z48L, Z54, Z54L

$12.00

 

Flex joint Block Assembly PN/ 784-5149 USE 684-04350

Fits 190-364-100, 450, 451 45" Snow Blower / Thrower

 032 42 inch Snow Thrower, 190-032-101, OEM-190-032
19A126 42 inch Two Stage Snow Thrower (2008 & Before), 19A-126-100 (2008 & Before)
303 40" Snow Thrower, 190-303-100
340 40" Snow Thrower, 190-340-100
341 42" Snow Thrower, 190-341-100
350 40" Snow Thrower, 190-350-100
353 45" Snow Thrower, 190-353-100
450 45" Snow Thrower, 190-450-100
451 45" Snowthrower
551 45" Snowthrower, 190-551-100
621 Two Stage Snow Blower 40"
624 Snow Blower Attachment
673 42" Snow Thrower, 190-673-100
818 48" Snow Thrower, 590-818-100
823 42" 2-Stage Snowthrower, 190-823-101
SB45 Snowblower, 59A40051727

$13.50

 

New Old Stock 449 45 inch Snow blower Spring Assist Kit PN/ 190-449-100

Comes with Instruction sheets

A real must when you attach a 350, 450 snow blower to any machine, It makes them lift even instead of the left rising first.

$190.00

450 Blower Fan Assembly PN/ 784-5145 USE 784-5145-0637 Model 450 Blower Fan Assembly PN/ 784-5145 USE 784-5145-0637

190-364-100 45" Snow Thrower (Cub Cadet)
450 45" Snow Thrower, 190-450-100
451 45" Snowthrower 

$150.00

 

New Old Stock Snow Blower Fan Assembly PN/ 684-0158 USE 684-0158-0637

Fits 032 42 inch Snow Thrower, 190-032-101
 19A126 42 inch Two Stage Snow Thrower

$45.00

 

New Old Stock Cub Cadet Snow Blower Greaseable Auger Gear Box PN/ 618-0244 USE 918-0244

Fits 353 45" Snow Thrower, 190-353-100
551 45" Snowthrower, 190-551-100
619 54" Snow Thrower, 590-619-100
624 Snow Blower Attachment
818 48" Snow Thrower, 590-818-100

Also fits any MTD brands, like Troy Bilt, Huskee, Yardman, Yard Machines & more

$360.00

 

  Bearing housing assembly PN/ IH-90531-C91, 741-0163 USE 741-0163A $24.00

NOS Front PTO and Two Stage Snow Blower pulley PN/ IH-90539-C1 USE 756-0440

190-364-100 45" Two Stage Front Mounting Kit
195-418 (1985 HM)
195-419 (1985 HM)
196-419 (1986 HM), 196-419-100 (HM 1986)
418 (1986 HM), 216-418-100 (HM 1986)

$200.00

 

  Tiller gearbox shaft, long PN/ IH-485303-R1 USE WM-63963 $52.00

  Tiller gearbox shaft, short PN/ IH-475601-R1 USE WM-63951 $50.00

NOS Snow Thrower Bevel Pinion Gear shaft Key PN/ IH-475642-R1

$1.00 Ea.

 

NOS OEM Snow Thrower small Bevel Pinion Gear 15 tooth PN/ IH-475604-R1

$125.00

 

Used Snow Thrower small Bevel Pinion Gear 15 tooth PN/ IH-475604-R1 SOLD OUT

$0.00

 

Used Tiller Snow Thrower small Bevel Pinion Gear 20 tooth PN/ IH-485305-R1

$95.00

 

Thrower Bevel Pinion Gear PN/ IH-475600-R1 Used Large Snow Thrower Tiller Bevel Pinion Gear 30 tooth PN/ IH-475599-R1

$90.00 Ea.

 

Thrower Bevel Pinion Gear PN/ IH-475600-R1 NOS Large Snow Thrower Tiller Bevel Pinion Gear 30 tooth PN/ IH-475600-R1

$125.00

 

Tiller lower bearing W/Locking Collar PN/ IH-485259-R91

Fits models 1 1A 2 2B Tillers

$42.00 Ea.

Tiller Lower Felt Seal PN/ IH-63720-C1 USE WM-63715

Fits models 1 1A 2 2B Tillers

$9.00 Ea.

Tiller Lower bearing flange PN/ IH-485261-R1

Fits models 1 1A 2 2B Tillers

NLA from Cub Cadet

$11.00 Ea.

Snowthrower / Blower auger bearing W/Locking Collar Set of 2

PN/ IH-475698-R91 USE IH-214366-C92  & IH-455102-R21 USE IH-455102-R22

Fits models BB36, CC36, CC42, CW36, QA36, QA42, QA36A, QA42A, and QA36B.

 $32.00 Set.

Snowthrower / Blower PTO bearing Locking Collar PN/ IH-473461-R91 USE IH-455102-R22

 $10.00.

Snow thrower auger bearing Mounting Flanges PN/ IH-462360-R1 Use WM-63540-0637 Set of 2

Fits models BB36, CC36, CC42, CW36, QA36, QA42, QA36A, QA42A, and QA36B.

NLA from Cub Cadet

 $10.00 Set

Snowthrower auger bearing W/Locking Collar & Mounting Flanges Sets ( 4 Flanges and 2 bearing sets )

Fits models BB36, CC36, CC42, CW36, QA36, QA42, QA36A, QA42A, and QA36B.

 $40.00 Set

Snow thrower Bearing Shield Housing PN/ 08253 USE 08253B

 $0.00 Ea.

Speed Up Pulley 3 1/2" QA36, QA36A & QA42, QA42A Snow Throwers or Blowers

These are Cast Steel Pulleys, NOT Pot metal

Click for more information on the upgrade

$36.00

 

Speed Up Pulley 3.15" QA36, QA36A & QA42, QA42A Snow Throwers
or Blowers.
Tractors with a 5/8 inch PTO belt

These are Cast Steel Pulleys, NOT Pot metal

Click for more information on the upgrade

$36.00

 

 IH - Belt for 3" Speed Up Pulley above   1/2" X 30"

This belt may or may not fit your application, so please measure pulley to pulley to see.

$10.00

 

 IH - Belt for 3" Speed Up Pulley above   1/2" X 31"

This belt may or may not fit your application, so please measure pulley to pulley to see.

$10.00

 

Stock 4" QA36, QA36A & QA42, QA42A Snow Throwers or Blowers

These are Cast Steel Pulleys, NOT Pot metal

Click for more information on the upgrade

$36.00

 

Lower drive belt guard for No. 1 or 2 and 2B tiller gearboxes PN/ IH-79-954-C1 or IH-79954-C1

 Used when mounting No. 1 or No. 2 Tillers on 82 series or newer tractors

$60.00

 

Lower pulley for 2B tiller using 5/8 belt. PN/ IH-135554-C1 USE WM-63369

 Used when mounting No. 1 or No. 2 Tillers on 82 series or newer tractors

$70.00

 

Lower pulley for 1, 1A or No. 2, 2A tiller using 1/2 inch belt. PN/ IH-485246-R91

Fits  No. 1 1A or No. 2 2A Tillers with 1/2" belt

$140.00

 

Tiller Belt for Quietline or Wide Frame Tractors 7/16" X 145"PN/ IH-61959-C1

IH 61959 C1

$52.00

Tiller Belt for Narrow Frame Tractors 13/32" X 141.8"PN / IH-487045-R2

IH 487045 R2

$92.00

Tiller Belt for Wide Frame Tractors 13/32" X 143.8"PN/ IH-549250-R1

IH 549250 R1

$89.00

Tiller Belt for 82 Series Tractors PN/ IH-135553-C1 WM-63385 Replaced by CNH 492923R2

5/8 wide 153 15/16" Long

NLA from Cub Cadet

$90.00

  Upper Tiller Large Pulley Belt - Gearbox to Tiller PN/ IH-487044-R1 USE IH-62235-C1

487044 R1 USE IH 62235 C1

$28.00

   Tiller Tine Left Hand    PN/ IH-485348-R1 USE WM-62801

$21.00 Ea.

   Tiller Tine Right Hand  PN/ IH-485349-R1 USE WM-62800 or WM-1030850P

$21.00 Ea.

 
 Tiller Tine Set of 2 PN/ IH-485348-R1 USE WM-62801 and IH-485349-R1 USE WM-62800 or WM-1030850P

One Left, One Right

$40.00 Set

 OEM Main Drive Belt For Cadet Tractors 700 thru 1650 PN/ IH-55053-C1

15/32 X 30"

Fits QA36A, QA42A, 59M Shredder, Grinder-Built 1974-1977 Drive and Mounting -Built 1974 to 1977

$16.00

 

OEM Snow thrower Drive Belt PN/ IH-487043-R1

Fits CC36, CC42, CW36, QA36, QA42 Snow Throwers

$18.00

 

OEM Snow thrower Main Drive Belt PN/ IH-78056-C1

Fits QA36A, QA42A Snow Throwers On 482 thru 782 Tractors

$19.00

 

450 451 Snow blower Main Drive V Belt PN/ 754-0340 USE 954-0340  5/8 x 84 in.

$41.00

 

448 551 Snow blower 825 Rear Mount Tiller Belt PN/ 754-0341 USE 954-0341 5/8 x 89"

$32.00

 

Haban snowblower / thrower cogged drive V-Belt Replaces  PN/ IH-1254788-C1 21/32" x 38"

Fits H42 H48 353 354 Snowblowers

$12.00

 

Front Blade Hydraulic Angle Brackets PN's/ 703-0589 & 703-0594

$105.00

 

Front Blade Hydraulic Angle Rear Bracket PN/ 703-0589

NLA from Cub Cadet

$60.00

 

Front Blade Hydraulic Angle Front Bracket PN/ 703-0594

$50.00

 

HEAVY DUTY New Old Stock Tiller Deck Mule Drive Pulley  PN/ IH-493164-R91

Fits 38, 42 & 48 Deck Mule Drives

Fits Tiller Front Mule Drives

NLA from Cub Cadet

 $90.00

New Brinly Cultivator Standard Keeper Clamp  PN/ C-169P

$6.00

New Brinly Cultivator Clamp Locking Wedge  PN/ C-170P

$6.00

HEAVY DUTY Tiller Deck Mule Drive Pulley inner bearing PN/ IH-542122-R91 SOLD OUT

Fits the IH-493164-R91 HEAVY DUTY Tiller Deck Mule Drive Pulley

Fits 38, 42 & 48 Deck Mule Drives

Fits Tiller Front Mule Drives

$0.00 Ea.

  Strip Trim PN/ IH-392622-R1 USE 731-0511-12

Fits 035 (1995 HM), 215-035-100 (HM 1995)
035214 (1994 HM), 214-035-100 (HM 1994)
RZT54 Kawasaki (2009), 17AI2ACK010 (2009), 17AI2ACK056, 17AI2ACK256

$0.00

NOS OEM Wide Frame Blade Sub-Frame PN/ IH-549068-R2 USE 703-0666-0499

SOLD

Fits 42" or 54" Front Blades or Plows Priced well under Retail

$0.00

IH -  NOS Snow Blade Pivot Frame PN/ 703-0664 USE 703-0664-0498  SOLD

Fits 375 & 424 42" Front Snow Blades also #376 54" Blades

$0.00

 IH - Belt for 3" Speed Up Pulley above   1/2" X 30"

This belt may or may not fit your application, so please measure pulley to pulley to see.

$0.00

 

 IH - Belt for 3" Speed Up Pulley above   1/2" X 31"

This belt may or may not fit your application, so please measure pulley to pulley to see.

$0.00

 

IH - Snowthrower Front Power Take-Off 90 Degree Gear Box Pulley USED

PN/ IH- 475613-R91 USE IH- 485247-R91 Also IH- 485-247-R91

Fits CC36, CC42, CW36, QA36, QA42, QA36A, QA42A

And REAR Tine Tiller Gearbox Model's 1, 1A, 2, 2A PN/ IH-485-247-R91

 

$0.00

 

Heavy Duty 42" Front Blade Cutting Edge 1/4"  thick PN/ IH-464371-R2 USE 703-0658

$0.00

Brand NEW Peerless Chain Tighteners set of 2    SOLD OUT $0.00

NOS 190-364-100 Two Stage Snow Blower Front PTO Mounting Kit PN/ 756-0442 SOLD OUT

Includes everything show in the picture.

190-364-100 45" Two Stage Front Mounting Kit
195-418 (1985 HM)
195-419 (1985 HM)
196-419 (1986 HM), 196-419-100 (HM 1986)
418 (1986 HM), 216-418-100 (HM 1986)

$0.00

 

NOS Model 378 42 and 54 inch Front Angle Blade Hydraulic kit PN/ IH-61904-C91 Replaced by IH 79063-C91  SOLD OUT

HYDRAULIC ANGLED BLADE ATTACHMENT | FOR TRACTORS w/FRONT HYDRAULIC OUTLETS- REPLACED BY 79063-C91

Includes everything show in the picture.

$0.00

 

  NEW OLD STOCK 433 electric rear PTO kit PN/ 190-433-100 SOLD OUT

Fits 982 1572 1772 1782 1872 1882 2072 2082 2084 2086 2182 2284

And YES the clutch assembly spacer is included

$0.00

NEW COMPLETE.   Mounted snow blade for Z_FORCE   “S”  {steering wheel} models 2011-3013. 

SOLD

 Model  19a70024100,  58 “ wide.   Angles from seat  of mower. 

Pick up in Elburn, Illinois 60119 or actual truck shipping cost from there.

$0.00

NEW COMPLETE  CUB CADET 42 inch SNOW BLADE PN/ MODEL 302

SOLD

Fits ALL 2000 series cub cadet tractors, lifts with handle in tractor, angles from drivers seat via arm and rod, full factory warranty, complete

Pick up in Elburn, Illinois 60119 or actual truck shipping cost from there.

$0.00

NEW IN CRATE MODEL 352 54 inch SNOW Dozer BLADE

FITS ALL 3000 SERIES CUB CADET TRACTORS.

Tractor must have model 343 front hydraulic hitch and either manual or hydraulic angle attachment.

SOLD

Pick up in Elburn, Illinois 60119 or actual truck shipping cost from there.

$0.00

  Snow Thrower belt adjusting bolt  PN/ IH-548186-R1 SOLD OUT

Fits QA36 and QA42 Snow throwers

$0.00

New Old Stock NOS tiller mounting assembly Narrow Frame and or Wide Frame SOLD OUT

Fits 1 1A 2 and 2A tillers with 1/2" PTO belt

ALSO comes with the belt guard listed below

Lower drive belt guard for No. 1 or 2 and 2B tiller gearboxes PN/ IH-79-954-C1 or IH-79954-C1

$0.000

 

New Old Stock NOS tiller mounting assembly 82 Series and up SOLD OUT

Fits 2 and 2B tillers with 5/8" PTO belt

ALSO comes with the belt guard listed below

Lower drive belt guard for No. 1 or 2 and 2B tiller gearboxes PN/ IH-79-954-C1 or IH-79954-C1

$0.00

 

42 inch Rear backfill blade pivot pin knob PN/ IH 473317 R1 IH-473317-R1 SOLD OUT

$0.00

NOS 42 and 54 inch Front Angle Blade Hydraulic hose PN/ IH-106256-C1

Fits 61904-C91 front dozer/snow blade

NLA from Cub Cadet

$0.00

 

   IH   NOS #1 or 1A Tiller Long Shaft & Tines to Extend Tillers          SOLD

PN/ IH-485272-R1 , IH-485348-R1 , IH-48534R1

$0.00

Click the Cub Below to Email Us:

Copyright CC Specialties. All rights reserved. 2003-17

* Discounts only apply to the lower 48 States.

DISCLAIMER

Cub Cadet Specialties is not affiliated with or sponsored by MTD Products Inc, which owns the Cub Cadet trademarks. MTD Products Inc.
is not responsible for the accuracy or quality of the material presented on this website.

 For more information concerning the latest in Cub Cadet tractors, please visit www.cubcadet.com

This website contains no material provided by MTD Products Inc, is not affiliated with or sponsored by MTD Products Inc, which owns the CUB CADET trademarks. It is not an official MTD Products Inc, website, and MTD Products Inc, is not responsible for any of its content. The official MTD Products Inc, website can be found at: www.mtdproducts.com/equipment/

The information and opinions expressed on this website, including the bulletin boards and/or chat rooms hosted on this site are the responsibility of the website's owner and/or visitors,
 and do not represent the opinions of MTD Products Inc.